Zenoah G5201P Uživatelský manuál stáhnout pdf (Strana 7)

GB-7

G4501/G5201/G5201P

6. Installing Guide Bar and Saw Chain

A standard saw unit package contains the items as illustrated.

Power unit

Bar protector

Guide bar

Saw chain

Plug wrench

(Hexagon socket (S13/S19) +

Slotted driver)

Screwdriver for carburetor adjustment

(Slotted driver)

Spike and mountaing screws

5. Fit the chain cover to the power unit and fasten the

nutstongertightness.

6. While holding up the tip of the bar, adjust the chain

tension by turning the tensioner screw until the tie

straps just touch the bottom side of the bar rail.

(1) Tensioner

screw

(2) Loosen

(3) Tighten

7. Tighten the nuts securely with the bar tip held up (12

~ 15 N·m). Then check the chain for smooth rotation

and proper tension while moving it by hand. If neces-

sary, readjust with the chain cover loose.

8. Tighten the tensioner screw.

NOTE

A new chain will expand its length in the beginning of

use. Check and readjust the tension frequently as a

loose chain can easily derail or cause rapid wear of

itself and the guide bar.

Open the box and install the guide bar and the saw

chain on the power unit as follows:

WARNING

• Thesaw chain has very sharp edges. Use thick

protective gloves for safety.

1. Pull the guard towards the front handle to check that

the chain brake is not engaged.

2. Loosen the nuts and remove the chain cover.

3. Install the attached spike to the power unit.

4.Gearthechaintothesprocketand,whilettingthe

saw chain around the guide bar, mount the guide bar

to the power unit. Adjust the position of chain ten-

sioner nut on the chain cover to the lower hole of guide

bar.

(1) Hole

(2) Tensioner nut

(3) Chain cover

NOTE

Pay attention to the correct direction of the saw chain.

Moving direction

01-G4501･5201･5201P_GB_306＿四.indd 7 13.6.20 11:29:38 AM

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

Komentáře k této Příručce

Žádné komentáře

Zenoah G5201P Uživatelský manuál Strana 7

Komentáře k této Příručce

Související produkty a manuály pro Elektrické řetězové pily Zenoah G5201P