Zenoah G4200 Uživatelský manuál

G4200GBGB-1G4200GB848C7693A0 (803)OWNER’S MANUALCHAIN SAW

G4200GB-10Normal operating modeAnti-freeze modeCylinder cover“Sunshine” mark“Snow” markSwitchChoke knobIcing cap1. H and L needles are restricted with

G4200GBGB-116. Sawing WARNING• It is not necessary to force the saw into thecut. Apply only light pressure while running theengine at full throttle.•

G4200GB-127. MaintenanceOiling portGrease portSprocketOiling portA log lying on the groundSaw down halfway, then roll the log over and cut fromthe opp

G4200GBGB-132. Fuel filter(a) Using a wire hook, take out the filter from the filler port.(b) Disassemble the filter and wash with gasoline, or replac

G4200GB-14of the bar rail. Apply a ruler to the bar and the out-side of a cutter. If a gap is observed between them,the rail is normal. Otherwise, the

G4200GBGB-1511. SpecificationsPower unit:Displacement (cm3): ... 40.1Fuel: ... Mixture (Gasolin

G4200GB-2EXPLANATION OF SYMBOLS AND SAFETY WARNINGSRead operator's instructionbook before operating thismachine.Wear head, eye and earprotection.

G4200GBGB-3Contents1. For Safe Operation ... 42. Explanation of Symbols on the Machine

G4200GB-410. Keep all parts of your body away fromthe saw chain when the engine is run-ning.11. Before you start the engine, makesure the saw chain is

G4200GBGB-5(3) Make certain that the area in whichyou are cutting is free from obstruc-tions. Do not let the nose of the guidebar contact a log, branc

G4200GB-62. Explanation of Symbols on the Machine WARNINGFor safe operation and maintenance, symbols are carved in relief on the machine.According to

G4200GBGB-7Power unitBar protectorGuide barSaw chainPlug wrenchScrewdriver for carburetor adjustment4. Fit the chain cover to the power unit and faste

G4200GB-84. Fuel and Chain Oil FUEL WARNING• Gasoline is very flammable. Avoid smoking or bring-ing any flame or sparks near fuel. Make sure to stopt

G4200GBGB-95. When engine has ignited first, push in the choke knobto the first-stage position and pull the starter againto start the engine.6. Allow